 |
|
|
||||||||||||||||||||||||||||||
- Goods Brief
- Attribute
Products
ePLC-32M with industrial grade embedded programmable controllers designed SOM196 core modules, external up to 256 points of I / O interface, constructed from standard modules. The input and output interface signal types including binary, analog, pulse volume interface, covering most of the electrical interface can be used flexibly in all walks of life, it can provide RS485 network communication interface, fully networked system , also have human-machine interface, communication interface, because of its reliability, programmable, good electrical interface to meet the requirements of the various models, ePLC-32M is a proven, good performance and low cost of controller.
特性 Feature
◆ standardized modular structure floor module, DIN rail mounting plastic bottom shell, jam-resistant aluminum shell. Interface, clearly marked, standard.
◆ As a main module, which itself provides a variety of signals up to 32 interfaces at the same time, can drive up to seven expansion modules mix, so that input and output points to 256 points. All I / O ports are a status indicator, so that debugging and monitoring at a glance.
◆ Configurable I / O points, to specify the number of points you need and the interface signal types, including A / D up to 8, D / A up to 3 Road and pulse input and output interfaces. I / O interfaces can be matching with photoelectric isolation interface with high reliability and robustness.
◆ two-way communication interface, optional RS232, RS485 and other communication interfaces with lightning protection.
◆ AC and DC operating voltage, wide voltage range: 24V (+ / -20%), internal high-stability power supply.
◆ with firmware upgrade within the software, by programming the serial port, users can easily update the software kernel.
◆ to provide software development platform and a variety of application interface software functions can be spliced into a dedicated controller software.
◆ Compatible Mitsubishi standard programmable logic controller (PLC), can be directly used Mitsubishi program files.
◆ can bind a variety of standard communication protocols, and configuration software (SCADA) constitute a distributed control system.
◆ Power Supply: AC and DC power supply, DC24V/AC18V (+ / -15%), current: <100mA Ambient Temperature: -20 .. 65 ℃.
◆ Real-time clock: provide optional real-time clock, optional battery protection (operational data).
◆ Communication Interface: COM1: RS232 (TTL) / RS485, COM2: RS232/RS485.
◆ Analog Input: Up to 8, 10-bit resolution, selectable NTC / V / mA / RTD / Thermocouple Analog (isolated, non-isolated) input can also be configured as digital input.
◆ Analog Output: Up to 3-way, 8-bit resolution, selectable V / mA of analog output isolation can also be configured to switch output.
◆ Pulse Input: Up to 4 Way ,0-5KHz, pulse volume (binary) input isolation.
◆ Pulse output: up to 3 Way ,0-5KHz, pulse volume (binary) output isolation.
◆ Switch Input: Up to 16 light separate switch input, mergers analog and pulse input.
◆ switch output: up to 16 light separate digital output, analog and pulse merger output.
◆ Shock: 10G 3 axes 3 times each.
◆ interference: noise simulator with a voltage to 1000 Vp-p5 noise pulse width of 1us, cycle 30 .. 100HZ noise interference, ePLC working.
◆ Voltage: AC 1500V 1 minute, the external terminals and ground terminal between the Core Board.
◆ Insulation resistance: DC 500V Megohmmeter, 5MΩ above.
◆ ground: a third ground, not ground, they can float.
◆ wiring: high reliability and plug-type Continental terminal blocks, screw-type immediately.
◆ Dimension: 145 x 120 x 48 mm, top and bottom connection, horizontal expansion.
|
|---|
| No Download Now! |
User Comment(Total0User Comment Num) |
|
|
|
lixianyi08