 |
|
|
||||||||||||||||||||||||||||||
- Goods Brief
- Attribute
Products
ePLC-24M with industrial grade embedded programmable controllers designed SOM196 core modules, external up to 248 points of I / O interface, constructed from standard modules. Input output interface signal types including binary, analog, pulse volume interfaces, covering most of the electrical interface can be used flexibly in all walks of life, it can provide RS485 network communication interface, network system can be fully accomplished , also have human-machine interface, communication interface, because of its reliability, programmable, good electrical interface to meet the requirements of the various models, ePLC-24M is a proven, good performance and low cost of controller.
Feature
◆ standardized modular structure floor module, DIN rail mounting plastic bottom shell, jam-resistant aluminum shell. Interface, clearly marked, standard.
◆ as an extension module, which connects the main controller of the bus interface, programmable device, providing up to 24 points in the switch signal interface, all I / O ports have a status indicator, so that debugging and monitoring at a glance.
◆ Configurable I / O points, to specify the number of points you need and the interface signal input and output types. I / O interfaces can be matching with photoelectric isolation interface with high reliability and robustness.
◆ AC and DC operating voltage, wide voltage range: 24V (+ / -20%), internal high-stability power supply.
◆ with programming software, through the programming interface, users can easily update the chip's logic program.
◆ switch output: configurable digital input or output, up to 32,
Enter an optional DC / AC switching with optical filters and input. Orders for the 16.
Optional DC50v/100mA band of light across the open collector digital outputs.
Optional DC50v/3A band of light across the high power FET switch output.
Optional high-power thyristor switch AC250/3A output.
Optional AC250/5A a power relay switch output.
◆ Bus driver: 8-bit bus, can be assigned the address space 32 Byte.
◆ Module Address :0-F address range, by coding switch can be freely set.
◆ Power Supply: AC and DC power supply, DC24V/AC18V (+ / -15%), current: <100mA
◆ Ambient temperature: -20 .. 65 ℃.
◆ Humidity: 5% .. 95% RH (no condensation), against corrosive gases, dust is prohibited.
◆ Shock: 10G 3 axes 3 times each.
◆ Voltage: AC 1500V 1 minute, the external terminals and ground terminal between the Core Board.
◆ Insulation resistance: DC 500V Megohmmeter, 5MΩ above.
◆ ground: a third ground, not ground, they can float.
◆ wiring: high reliability and plug-type Continental terminal blocks, screw tight type.
◆ Dimension: 110 x 120 x 48 mm below the wire on the horizontal extension.
|
|---|
| No Download Now! |
User Comment(Total0User Comment Num) |
|
|
|
lixianyi08