Products  

 ePLC-12M with industrial grade embedded programmable controllers designed SOM196 core modules, external up to 236 points of I / O interface, constructed from standard modules.  The input and output interface signal types including binary, analog, pulse volume interface, covering most of the electrical interface can be used flexibly in all walks of life, it can provide RS485 network communication interface, fully networked system , also have human-machine interface, communication interface, because of its reliability, programmable, good electrical interface to meet the requirements of the various models, ePLC-12M is a proven, good performance and low cost of controller.

 Feature

 ◆ ePLC-12M is the embedded controller, which is the adoption of highly reliable, SOM196 Industrial Embedded Core Module, I / O peripheral modules with standardized interfaces. 
◆ Configurable I / O points, to specify the number of points you need and the interface signal types, including A / D up to 6 Road, D / A up to 3 Road and pulse input and output interfaces, with high reliability. 
◆ programmable control logic, including the control of a variety of ways designed to control the customer requirements in full accordance with the preparation of appropriate operating procedures on their own, dozens of control parameters and logic can choose. 
◆ controller with RS485 remote control can be realized and network management.  It can bind a variety of
JonhsonControls 、 Trane 、 HollyWell,Standard communication protocols, such as JonhsonControls, Trane, HollyWell and other system software constitutes a distributed control system. 
◆ in eRTU-M196 motherboard with embedded programmable controller type, with 12 channels I / O interfaces. 
◆ simple combination model can save the cost of wiring and installation. 
◆ with firmware upgrades in software, by programming the serial port, users can facilitate the achievement of software upgrades.
◆ DC24V/AC18V(+/-15%) .◆ Power Supply: AC and DC power supply, DC24V/AC18V (+ / -15%), the basic controller current: <400mA.

 Performance

◆ PLC controller: 16-bit industrial-grade CPU, 16/20 MHz, 64K/32K power-down to keep the memory. Optional real-time clock, optional battery protection (operational data). 
◆ Communication Interface: COM1: RS232 (TTL) / RS485, COM2: RS232/RS485. 
◆ Analog Input: Up to 6 way, 10-bit resolution, selectable NTC / V / mA / RTD / Thermocouple Analog (isolated, non-isolated) input can also be configured as digital input. 
◆ Analog Output: Up to 3-way, 8-bit resolution, selectable V / mA of analog output isolation can also be configured to switch output. 
◆ Switch Input: Up to 6 way light separate digital input, analog and pulse acquisition input. 
◆ switch output: up to 6 way light separate digital output, analog and pulse merger output.

 Electrical indicator

◆ Storage Environment: Temperature: -20 .. 75 ℃, humidity: 5% .. 75% RH (no condensation). 
◆ Operating Temperature: 0 .. 65 ℃. 
◆ Humidity: 5% .. 75% RH (no condensation), against corrosive gases, is strictly prohibited dust.

◆  Earthquake: 10 .. 55HZ.  0 .. 55mm (maximum 2G) 3 1 hour each axis.
◆  Shock: 10G 3 axes 3 times each.
◆  Interference: The simulator produces voltage noise 1000 Vp-p5 noise pulse width of 1us, cycle 30 .. 100HZ noise disturbance, the controller is working correctly.
◆  Withstand Voltage:  I / O between external terminal and case.
◆  Insulation resistance: DC 500V Megohmmeter, 5MΩ above.
◆  Ground: The third ground, not ground, they can float.

◆ Dimension: 120 × 80 × 25 mm, panel installation.